Yamaha RoadStar, Warrior, Kawasaki Wide Tire  Bolt on Kits

 

All Kits: Include Rear Fender, Swingarm, Yamaha Bearings, Shaft Extension for 240-250, 280-300 Kit , Tension Blocks, Tension Bolts, Washers, Nuts, Stainless steel Axle 1''or Metric and Raw Smooth Sandard Axle Cover's.  (Does not come with pivot axle tube or end caps must use your stock ones).  Both Yamaha RoadStar and Warrior kit's fit all 2011 and down models. Please not

all 280-300 wide tire kits will have to run a 1''1/8 Yamaha stock belt.

 

For the Yamaha RoadStar the 240-300 RoadStar Kit comes with a steel bolt on rear fender (using your existing stock bolts).  This fender has a cage like desgin mirroring your stock OEM fender so you can hold a second rider.  With this rear fender you can use your stock seat if needed. (All Yamaha RoadStar models need to run a 1''1/8 drive bellt for the wide tire kits).

 

Yamaha RoadStar Wide Tire Kit's

280-300

#7600

Yamaha RoadStar  280-300 Wide Tire Bolt on Kit.     $2,151.99

 

#7600A

Yamaha RoadStar Rear 240-300 Bolt on Fender       $787.50

 

 

 

BSC Swingarm's will fit just like stock OEM Yamaha Swingarm's , all Swingarms have the same overall length so you can use your stock belt or switch to a chain.  All swingarm's are designed to give the same overall ride height as your stock OEM Yamaha Swingarm.  With BSC Swingarms you still have the ability to use stock shocks, a lowering knuckle, adjustable dogbones, or air ride suspension. 

 

 (Must use your end caps and pivot axle bearing tube from stock Swingarm to insert on BSC Wide Tire Kit).  We do not provide Wheel Spacers with BSC kits - if Wheel Spacers are needed please ask when placing order. 

Yamaha RoadStar Upgrade Kit

#7601 Yamaha RoadStar

280-300 Wide Tire Kit -- Upgrade.        $3,276.99 

 

 

Upgrade Kit includes Bolt on Rear Fender, Chrome L.E.D Afterburner Axle Cover's with removable points for color options, Swingarm Powder Coated Glossy Black, 1'' Axle for HD Wheels, Chrome Pulley/Rotor Braking System, Yamaha Bearings, Tension Blocks, Tension Bolts, washers and nuts, 280-300 Shaft Extension.

        

(Must use your end caps and pivot axle bearing tube from stock Swingarm to insert on BSC Wide Tire Kit).  We do not provide Wheel Spacers with BSC kits - if Wheel Spacers are needed please ask when placing order. 

240-250

#7602

Yamaha RoadStar 240-250 Wide Tire Bolt on Kit with Raw Smooth Axle Covers.      $1,999.99

 

#7603

Yamaha RoadStar With Chrome L.E.D Afterburner Axle Cover's (as shown in pic)   $2,299.99

 

 (Must use your end caps and pivot axle bearing tube from stock Swingarm to insert on BSC Wide Tire Kit).  We do not provide Wheel Spacers with BSC kits - if Wheel Spacers are needed please ask when placing order.

 

All Kits: Include Rear Fender, Swingarm, Yamaha Bearings, Shaft Extension for 240-250, 280-300 Kit , Tension Blocks, Tension Bolts, Washers, Nuts, Stainless steel Axle 1''or Metric and Raw Smooth Sandard Axle Cover's. (Does not come with pivot axle tube or end caps must use your stock ones). Both Yamaha RoadStar and Warrior kit's fit all 2011 and down models.

Powder Coat Options:

Top View is Glossy

Bottom View is Textured Black

#7604

Yamaha RoadStar and Warroir 240-300 BSC Swingarm.    $995.99

 

Includes Yamaha Bearings, Stainless Steel Axle, Hex head tension bolts and nuts, Tension Blocks, Tension Bolts, Washers, Nuts, Raw Smooth Standard Axle Cover's 

 

(Must use your end caps and pivot axle bearing tube from stock Swingarm to insert on BSC Wide Tire Kit).  We do not provide Wheel Spacers with BSC kits - if Wheel Spacers are needed please ask when placing order. 

 

 

 

 

 

 

 BSC New Yamaha RoadStar

Rear Stock Swingarm Axle Kit. 

This is a axle kit to fit a American style wheel with a 3/4 axle bearings for the stock swingarm.

Comes with everything in picture tension blocks, stainless steel axle ,bolts and washers.

#6000 $195.00

 Yamaha Warriror Wide Tire Kit's

Warrior Stock Brake Set Up

Yamaha Warrior 240-300 Swingarm to Run Stock Set up.

This Swingarm can run Stock Brake Rotor on the right side using your stock caliper and brake bracket.

 

 

 

#7605 - A

Yamaha Warrior Swingarm - RAW.     $1,069.99

Includes Brake bracket and Standard Smooth Axle Covers.

 

 

#7605 - B

Yamaha Warrior Swingarm - POWDER COATED.     $1,254.99 

Includes Brake bracket, Powder Coat with Chrome Smooth Axle covers.

(You can add L.E.D's for $75.00)

 

 

#7606

Yamaha Warrior Swingarm - POWDER COATED with L.E.D Afterburner Axle Covers.   $1,554.99

Includes Brake bracket, Powder Coat with Smooth, Chrome Diamond or Black Diamond Axle covers                                                                                     

 

Yamaha Warrior Kit: Includes Yamaha Bearings, Metric 20mm Stainless Steel Axle, Tension Blocks, Tension bolts, washers, nuts.

  

(Must use your end caps and pivot axle bearing tube from stock Swingarm to insert on BSC Wide Tire Kit).  We do not provide Wheel Spacers with BSC kits - if Wheel Spacers are needed please ask when placing order. 

Brakester kit in picture sold seperately - for more details on Brakester kit please see products page part #7642

#7607

Yamaha Warrior 240-250 Wide Tire Bolt on Kit    $1,910.99

 

#7608

Yamaha Warrior 280 Wide Tire Bolt on Kit   $2,229.99

 

#7609

Yamaha Warrior 300 Wide Tire Bolt on Kit   $2,332.99

 

All Kits: Include Rear Fender, Swingarm, Yamaha Bearings, Shaft Extension for 240-250, 280-300 Kit , Tension Blocks, Tension Bolts, Washers, Nuts, Stainless steel Axle 1''or Metric and Raw Smooth Sandard Axle Cover's.  (Does not come with pivot axle tube or end caps must use your stock ones).  Both Yamaha RoadStar and Warrior kit's fit all 2011 and down models.

 

For Yamaha Warrior kit's please send in your stock fender stays to modify if you are doing a 300 kit.

 

 

#7610

Yamaha Warrior 280 New fender stays with new round top fender  $764.99

 

#7611

Yamaha Warrior 300 Modifying

your stock fender stays with new round top fender                       $864.99

 

              

#7612

Yamaha Warrior 240-300 Rear round top fenders $299.00

Yamaha Raider 280-300  Bolt on Wide Tire Kit.

Yamaha Raider 280-300 Bolt on Kit. This is our steel 280-300 swingarm with direct bolt on for the Yamaha raider.

 

To be used with your stock belt.

 

This swingarm is to go with a H-D style wheel from 18x 8.5 up to 18x10.5 wheel with a 1'' axle.

 

Pulley/rotor system

With pulley /rotor system we can weld on brake tap. You can also used pulley on left and rotor on right ,tap for brake bracket not provide at this time.

 

Kit comes with Rear Fiber glass Fender and stays 303 stainless steel axle ,Off set shaft exstension tensioner blacks, bolts, washers, an new Yamaha bearings. (Please see Rear Fender Below)

 

 

#7400 Yamaha Raider 280-300 Wide Tire Kit. $2,124.99

The fender is constructed of fiberglass with a core reinforcement to
ensure durability as well as longevity. The fender struts are CNC machined
from billet al
umin
um
.

#7401 Rear Fiberglass Fender $787.50

Kawasaki Wide Tire Kit's

New Kawasaki Vulcan 900 240-300 Wide Tire Kit

Kawasaki Vulcan 900  Custom Wide tire 250 Kit

Kawasaki Vulcan 900  Custom Wide tire 300 Kit

Pro Street

 

#7702 Kawasaki Vulcan 900 280-300 Wide Tire Kit. Include Black Powder Coated Swingarm, Chrome Smooth Axle Covers, Chrome BSC Logo, Bolt on Rear Steel Fender, Chrome 80 Spoke Single Side Hud 18x10.5 Wheel,Avon Tire, Sprockster Brake an Caliper Kit, 2 Chain's, Front 21 Sprocket, Chrome Banjo Brake Line Fittings, Brake Line, New Pivot Axle Bearings, 1'' Stainless Steel Axle, Bolts Washer Nuts, Tension Blocks

Starting at $4,940.00

#7631 280-300 Wide Tire Kit

300

240-250 Wide Tire Kit

240-250 Wide Tire Swingarm

#7630

Kawasaki 900 240-250 Wide Tire Swingarm   $1,099.00

Kawasaki Pivot axle bearings, Swingarm Raw, stainless steel 1''or Metric axle, Tension blocks, Tension bolts,washers, nuts, Raw Smooth standerd axle covers (Picture coming soon)   

 

#7631

240-250 Kawasaki Rear Bolt on Fender  $299.99

 

 

 

#7632 Kawasaki Vulcan 900 06-09 JackShaft 280-300 Wide Tire Swingarm  $1,598.99 

JackShaft Swingarm Includes: Kawasaki Pivot Axle Bearings, Stainless Steel 1" or Metric axle, 2 Chain Sprockets, Tension blocks, Tesion bolts, washers, nuts, Raw smooth standard axle covers (Shown in Picture)

 

 

#7633

280-300 Kawasaki Rear Bolt on Fender $787.50

 

 

#7634            

Kawasaki Gear 19 teeth     $34.99

 

#7635

Kawasaki Gear 21 teeth   $39.99

 

#7635-A

Motorcycle Chain Black,Gold,Red,White,Blue,Green,Standard Nickel   $185.00

#7631

240-250 Kawasaki Rear Fiberglass Bolt on Fender 

 $299.99

Steel Fender are available

LED TAILLIGHT/TURN SIGNAL/LICENSE PLATE KIT FOR KUSTOM WERKS FENDER

$325.00

This kit can work with 06-13 Kawasaki Vulcans 900The swingarm is a precision tig welded, manual bent tubing swingarm with a twin chain jack shaft.  The swingarm accomodates a one inch axle. This custom swingarm replaces your existing stock swingarm.  The custom fender requires light cutting and welding to your frame.  Relocating your coolent tank is needed.  We know you'll be impressed with the end product.  Please check out our gallery for pictures and axle cover options.  

The 240-250 is a direct bolt on swingarm (no jackshaft needed) you can use your stock belt and front pully. The Rear fender has no cutting or welding you can use your stock struts to bolt in the rear fender.  

 

Swinarm Axle Covers

L.E.D Afterburner's and Smooth Axle Covers.

Black Diamond, Chrome Diamond, Smooth Chrome, Chrome Standard

$298.99 

#6100 Black Diamond
#6100 Black Diamond
#6102 Textured Black Diamond
#6102 Textured Black Diamond
#6103 Chrome Diamond
#6103 Chrome Diamond
#6104 Smooth Chrome
#6104 Smooth Chrome

#6101 Smooth with out point

$259.99

#6101-C Smooth with out point

$259.99

Stock Length Swingarm with Drag support bar.

BSC Drag Style Swingarm 2'' Over

#7613

BSC Drag Style 2'' Over  Swingarm      $1,145.99

Includes Stainless Steel 1'' Axle or Metric, Yamaha Bearings, Tension Blocks, Tension Bolts washer, nuts.

 

(Must use your end caps and pivot axle bearing tube from stock Swingarm to insert on BSC Wide Tire Kit).  We do not provide Wheel Spacers with BSC kits - if Wheel Spacers are needed please ask when placing order. 

#7614

BSC Drag Style 2'' Over Swingarm - POWDER COATED    $3,899.99

 

Includes Chrome Diamond L.E.D Afterburner Axle Covers, BSC Chrome Diamond Shock Mount Covers, Chain Drive Sprocket Kit with Chrome Caliper and Mounting Kit, RC 18X10.5 Chrome Wheel single side hub.

Accesories

BSC Chrome Swingarm with Shock Mount Covers

 

#7615 BSC Chrome Swingarm for Yamaha RoadStar, Warrior HD set up with Chrome Shock Mount Covers, Chrome Diamond L.E.D Axle Covers.          $1,699.99

 

#7617
#7617
#7618
#7618
#7619
#7619
#7621
#7621

#7617

Black Diamond Shock Mount Covers   $49.99

 

#7618

Chrome Diamond Shock Mount Covers    $59.99

 

#7619

Polish Pointed 8 Hole Shock Mount Covers    $49.99                       #7620 Chrome $59.99

 

#7621

Polish Pointed Smooth Shock Mount Covers         $49.99                    #7623Chrome $59.99

#7624
#7624
#7626
#7626

#7624

BSC Frame Pivot Axle Smooth Point Covers Polished    $49.99              #7625 Chrome $59.99

 

#7626

BSC Frame Pivot Axle Smooth Covers Polish    $49.99                        #7627 Chrome $59.99

 

#7628

BSC Frame Pivot Axle Chrome Diamond Covers   $59.99               #7629 Black Diamond $59.99

Yamaha RoadStar ,Warrior Shaft Extenion

Yamaha RoadStar , Warrior Shaft Extension

#7616-A Yamaha RoadStar , Warrior Shaft Extension to be used with 

your stock pulley or sprocket for 240-300 $239.99


 Doing a fat tire conversion is now even easier. This pulley / sprocket offset spacer is needed when doing a fat rear wheel conversion. It will enable you to move the belt up to 1 inch out from the factory position. This is designed to be used with the original factory pulley on the Raider, Road Star, Road Star Warrior, Roadliner and Stratoliner models.  Used for up to a 300 conversion.
 
 

#7616-B Yamaha RoadStar , Warrior Shaft Extension to be used with 

your stock pulley or sprocket for 330-360. $329.99

 

 

 Doing a fat tire conversion is now even easier. This pulley / sprocket offset spacer is needed when doing a fat rear wheel conversion. It will enable you to move the belt up to 4 inches out from the factory position. This is designed to be used with the original factory pulley on the Road Star. 2005 and earlier models. Used for a 330 & 360 conversion.

Required for all swingarm kits and big-tire frames

31 Tooth Pulley
1" Offset

  • Yamaha Road Star 1600 (99-03)
  • Yamaha Road Star 1700 (04-07)
  • #76160 $349.99
  • #7636

    BSC 280 - 300 Wide Tire Kit including Rim    $2,499.99

    Includes Swingarm,Raw Afterburner L.E.D Axle Covers with Removable Points,Chrome Rear 18x10.5 80 Spoke wheel, Chrome 1''1/8 70th Super Spoke Pulley, Super Spoke 11.5 Rear Rotor, Stainless Steel 1''Axle, Yamaha Bearings, Tension Blocks, Washers and Nuts.